As milling technology trends toward extremely high speeds within smaller footprints, safety issues can’t be ignored. Loose tools spinning at high rotations per minute (
The retention knob is the main interface between the machine and the spindle, and when exposed to severe conditions, failures can result in a tool breaking loose during a cutting operation – producing a projectile that can injure employees and damage the spindle,
Nagoya, Japan-based Brother Industries Ltd. identified the need to modify the standard used to manufacture their retention knobs, including the material tensile strength, to make them stronger to meet the machine’s manufacturing demands.
JM Performance Products Inc. (JMPP) in Fairport Harbor, Ohio, developed its High Torque retention knobs to address the safety issues and responded immediately to Brother’s updated specs with two BT30 knob options. The JM25084ACHTHS (with coolant hole) and JM25084AHTHS (without coolant hole)
Most standard retention knobs are being designed and manufactured to the standards put in place more than 40 years ago, while the evolution of the tooling and the mills
JMPP testing demonstrates how standard design retention knobs often expand the
One key factor in retention knob failure is material strength. JMPP proactively migrates 30- and 40-taper retention knobs from traditional 8620H material to 9310H to ensure their durability and strength. The material upgrade increases tensile strength by 40%.
JMPP laser marks parts with a date on each knob. The date-in-service feature, which includes a unique serial number for traceability, shows how long the knob has been in use, ensuring safety as retention knobs are a perishable, consumable part. A typical retention knob is good for 1-to-3 years, depending on machine use. The operator can enter the unique identifier serial number to show how long a knob has been in service and when a tool change should be made.
The Brother example is part of a continuing trend of manufacturers being progressive in trying to push capacity while also considering safety. JMPP is also working with Kitamura for knobs for its 6ft x 9ft, 7Mycenter 30 taper horizontal machine, which offers 2,362rpm on all axes.
JMPP President John Stoneback says, “The industry as a whole needs to recognize the potential for machine spindle interface problems that these small footprint/high rpm machines represent. Our High Torque retention knobs have inherent design elements that meet these issues head-on and we’re hoping that machine builders, tooling builders, and distributors will join us in getting this vital message out.”
Brother Industries Ltd.
JM Performance Products