The M120 Millturn machining center handles lengths ranging from 78" to 315" and swings up 48". Offering power ranges up to 168hp and torque values up to 8,680 lb-ft in the main spindle, high feed rates on all axes deliver consistent productivity. The 74hp direct-drive milling spindle offers maximum power, even at low speed rates, advantageous when using large drills and milling cutters.

Clamping forces of the B-axis allow the use of damped boring bars with a diameter-length ratio of up to 1:14. A separate magazine is available for heavy ID-machining tools up to 5ft and 320 lb.

Turning, boring, milling, gear cutting, deep-hole boring, and ID-machining are possible in any angle

WFL Millturn Technologies
http://www.wfl.at